Installing Mt400 - Domestic GROUP WAECO MagicTouch MT400 Instrucciones De Montaje Y De Uso

Installing MT400

5.2 Determining the installation location for the control
unit
Select the installation location for the control unit:
in the vehicle interior,
not in areas where strong electrical fields could cause interference, e. g.
ignition cables or central control electronics,
not in the immediate vicinity of other control units, in order to prevent the
devices from interfering with each other (which could cause malfunctions
and reduce the range of the radio remote control),
not directly next to ventilator nozzles.
5.3 Determining the installation location for the status
LED
Select a position on the dashboard.
6 Installing MT400
See fig. 4
➤ Screw the control unit firmly to the vehicle with the screws supplied (B) or
use double-sided adhesive tape (A).
➤ Fix the status LED to the dashboard with double-sided adhesive tape.
26
MagicTouch MT400