Operating MagicTouch
To open the central locking:
➤ Press the "Open" button on the hand-held transmitter.
✓ If the ignition is switched off, the hazard light flashes twice for confirma-
tion.
✓ In vehicles with a negatively connected door contact: the interior lighting
is switched on and goes out again when the ignition is switched on.
✓ The status LED goes out.
Using the convenience function
If the vehicle is locked, pressing the middle button on the hand-held trans-
mitter activates the convenience output. Depending on the setting, the con-
venience output is connected when the central locking is closed, or by
pressing the "Comfort" button.
✓ The hazard lights flash once for confirmation.
Automatically re-locking the central locking system
If the hand-held transmitter is pressed unintentionally (central locking opens)
without any door being opened, the central locking system closes again after
approx. one minute.
Safety locking
If the ignition is switched on, the central locking system can be locked using
the hand-held transmitter. In doing so, the indicators are not activated.
The central locking system can be re-opened using the hand-held transmitter
or by switching off the ignition. This function is not supported by all vehicle
models.
9.2
Replacing the battery
You must replace the batteries:
when the range of the hand-held transmitter decreases distinctly, or
when the control LED flickers during transmission or
when, after opening, the hazard lights flash quickly 5 times. In this case,
replace the battery within one month.
36
MagicTouch MT400