Programming Magictouch; Programmable Functions; Programming Functions - Domestic GROUP WAECO MagicTouch MT400 Instrucciones De Montaje Y De Uso

Programming MagicTouch

8 Programming MagicTouch
See fig. e
8.1

Programmable functions

The standard settings are printed in bold.
Function
Activation time for central
locking system
Convenience function
Control for door contact
switch
Control for hazard lights
system
8.2

Programming functions

➤ Open the vehicle door.
➤ Switch on the ignition.
➤ Press and hold the "Open" button and switch the ignition off.
➤ Let go of the button.
✓ The status LED and the hazard lights are lit continually.
✓ The system is now in programming mode.
➤ Select the corresponding setting in accordance with the table, see chapter
"Programmable functions" on page 34.
✓ The status LED and the hazard lights go out while the value is being
saved.
✓ After 2 sec. you will receive a confirmation:
– After pressing the "Close" button: status LED and hazard lights flash
once.
– After pressing the "Open" button: status LED and hazard lights flash
twice.
34
Values
3 sec.
0.7 sec.
activated
deactivated
positive connection
negative connection
activated
deactivated
MagicTouch MT400
Press button
1 x "Close" button
1 x "Open" button
2 x "Close" button
2 x "Open" button
3 x "Close" button
3 x "Open" button
4 x "Close" button
4 x "Open" button