Tabla de contenido
Publicidad
Rapier 48w Switch
Checking LEDs
The following tables describe how the switch and expansion modules report
faults and operational activities. Expansion modules are optional and must be
purchased separately. Contact your authorised Allied Telesis distributer or
reseller, or visit
expansion modules.
Status LEDs
LED
FAULT
POWER
NSM LEDs
LED
SWAP
IN USE
18
All manuals and user guides at all-guides.com
www.alliedtelesis.com
State
Description
Off
Switch operation is normal.
Red
The switch or management software is
malfunctioning.
1 flash
A switch fan has failed.
Green
The switch is receiving power and the
voltage is within the acceptable range.
Off
The switch is not receiving power.
State
Description
Green
The NSM and its PICs are ready to be hot
swapped.
Off
The Hot Swap button must be pressed
before the NSM or its PICs can be hot
swapped, or the software version does not
support hot swapping.
Green
The NSM is installed, is receiving power and
is operational. The NSM and its PICs are
NOT ready to be hot swapped.
Off
No NSM is installed, or the NSM is not
installed correctly (the switch unit has not
recognised the NSM.
for more information on purchasing
Publicidad
Tabla de contenido
