Philips HeartStart Instructor OnSite HS1 Manual De Instrucciones página 14

4
If the training scenarios are used as part of a formal training course, the
instructor may wish to:
• select only the scenarios appropriate for the training level goals,
• create case histories and patient details for the selected scenarios,
• highlight certain features of the defibrillator's performance,
• assure that users conform to local protocols,
• check pad placement, and
• evaluate user knowledge on topics such as CPR and assessing the
patient.
USING THE TRAINING PADS CARTRIDGE
To use the training pads cartridge, remove it from any packaging in which it is
provided or stored, then follow the steps below.
NOTE: Do not remove the clear hard protective lid or resealable film cover
from the training pads cartridge before installing it in the HS1 defibrillator.
NOTE: To turn off the defibrillator at any time, press and hold the On/Off
button until the defibrillator turns off.
1. Be sure that the HS1 defibrillator has a battery and a white SMART Pads
cartridge installed and that the green Ready light is blinking.
2. Remove the Adult or Infant/Child SMART Pads
cartridge from the compartment on the front of
the HS1 defibrillator. To release the cartridge,
slide the latch on the top of the unit over to the
side (A). Then lift out the closed cartridge, as
shown in the illustration (B).
3. Insert the M5073A or
M5074A Training Pads
cartridge into the
compartment on the front
of the HS1 Defibrillator (A).
Press the cartridge down
firmly until it clicks into
place. Be sure the green
handle is pressed all the way
down (B).
B
A
A
B