Identifying The Parts Of The Everest Printer; Front View; Control Panel; Control Panel Indicators - Rimage Everest 600 Guia Del Usuario

Identifying the Parts of the Everest Printer

This section describes the Everest 600 printer hardware and features.

Front View

Side Cover Latches
Side
Cover
Control
Panel
2001474_B

Control Panel

Control Panel Indicators

Handle
Image
Printer Tray
For more information visit rimage.com/support
The control panel is located on the front of the Everest 600.
It includes an operator button and four indicator lights. (One
light is on the operator button.) The control panel allows you to
monitor and control the printer.
The table below identifies the name and function of all parts of
the control panel.
Name Function
Operator button
The Operator button is used to
complete the following tasks:
•
•
•
•
Error indicator light The Error indicator light
(on the operator illuminates when operator action
button) is required.
Open the printer tray
Close the printer tray
Reset after an error
Put the printer into sleep
mode. To put the printer into
sleep mode, press and hold
the Operator button for 10
seconds. To resume normal
operation, press the Operator
button again.
7