Switches; Ac Voltage Switch; Mode Switch - Rimage Everest 600 Guia Del Usuario

Identifying the Parts of the Everest Printer

Switches

There are two switches on the rear of the Everest 600: the AC voltage switch
and the mode switch.

AC Voltage Switch

The AC voltage switch is used to select the AC voltage of the power outlet.
This switch has two positions: 110V and 220V.
Warning! Set the AC voltage switch to match the voltage of the AC
n
power outlet.
2001474_B

Mode Switch

AC Voltage
Switch
For more information visit
Mode Switch
Important! You must power off the printer before changing the mode.
Power the printer on when the mode switch is set.
The mode switch is a rotary switch used to set the operational mode of the
Everest 600. The opening at the base of the cap on the switch indicates the
selected mode. When the printer is shipped, it is set to the correct mode for
your operation. You should not have to change the switch position unless
you perform diagnostic tests.
Switch Position Use
0 Standalone printer
2 Rimage autoloader or AutoPrinter
3 Diagnostic testing
All others Not used
rimage.com/support
9