Install The Retransfer Ribbon; Clean The Print Head - Rimage Everest 600 Guia Del Usuario

Maintaining the Everest 600 Printer

Install the Retransfer Ribbon

1. Remove the new retransfer ribbon from the packaging.
Supply Roll
Retransfer Ribbon Carrier
2. Position the retransfer ribbon.
a. With the supply roll on the left side, unwind several inches of the
retransfer ribbon.
b. Slide the retransfer ribbon under the retransfer ribbon carrier.
c. Install the supply roll on the left side of the retransfer ribbon carrier.
Be sure that the ribbon winds under the supply roll.
d. Bring the take-up roll up and around the guide rollers and snap the
roll into place.
2001474_B
Take-up Roll
For more information visit
3. Rotate the take-up roll counterclockwise in order to tighten the
retransfer ribbon.
4. Reassemble the printer.
a. Slide the retransfer carrier into the printer.
b. Close latches 1, 2, and 3.
c. Close the side cover.
The printer is ready for use.
Clean the Everest 600 Printer
Regular cleaning helps to keep your Everest 600 printer in optimal operating
condition.

Clean the Print Head

Latch 1
Tools required:
#
• Sponge swabs with long handles (included in the Everest cleaning
kit)
• 99% Isopropyl alcohol
rimage.com/support
Print Head
21