Sonic Impact Technologies i-F2 Guía De Usuario página 3

i-F2 Diagram:
1. Compartment Lock
2. Speaker Driver UniPod
3. iPod®30 Pin Docking Station
4. Input Jacks
5. Volume Controls
6. Headphone/Remote Compartment
7. iPod® Storage Compartment
8. iPod® Storage Compartment Door iPod
All manuals and user guides at all-guides.com
9. Power On/Off and LED
10. Battery Life Indicator LED
11. Battery Cover Lid
12. Lithium Ion Battery
13. Remote
LOCATING AND SETTING UP YOUR i-F2 SYSTEM
Position i-F2 system on a stable, level surface. The i-F2 system can be placed close to video displays
such as TVs and computer monitors without distorting the image, but keep magnetic storage media
(such as drives, disks, and tapes) at least four inches away to avoid data loss.
Make sure that the plastic clips securing the hinge straps are secure. If necessary, adjust the tension of
the release button on the clips by pressing in through the hole on the back of the clip, using the tip of a
ball point pen. Note that you can open the i-F2 completely flat by releasing both clips.
CONNECTING TO YOUR i-F2
Warning: Ensure that i-F2 system is in the POWER OFF mode before making any connections and before
docking the iPod into the i-F2 system. To ensure proper operation, please carefully follow the
connection sequence as described below and in the order indicated.
Attach the iPod adapter sleeve, provided with your i-F2, that matches the model of your iPod. Each
sleeve will be marked with the iPod models. An iPod model with a 30 PIN connector can be connected
directly to the 30 pin docking station located on the i-F2 system. An older iPod model without a 30 PIN
connector can be connected via the AUDIO IN port located at the side of your i-F2 case and by using the
3.5 mm stereo cable, included. When you're sure that either method of connection has been made you
are ready to play the i-F2 speakers.
POWER
The i-F2 can operate using the rechargeable built-in Lithium ion battery. You may bypass the battery
and use the external AC 9V@1.8A power adapter included with your i-F2. The AC adapter will power
your unit, recharge the Lithium ion battery and recharge your iPod in the 30 pin connector station all
simultaneously.
To use external power by power adapter:
When the iPod is connected to the i-F2 system, insert the AC adapter barrel connector into the jack
marked DC IN 9V , and then insert the universal power adaptor blade end into your AC power