GRAPHITE 59G394 Manual De Instrucciones página 12

TRANSLATION OF THE ORIGINAL INSTRUCTIONS
CAUTION: BEFORE USING THE POWER TOOL READ THIS MANUAL CAREFULLY AND KEEP IT FOR FUTURE
REFERENCE.
● Use the belt sander for sanding only.
● Do not use the belt sander when it is held in fixed position, by moving processed material.
● Inhalation of dust, such as lead based, metal or of certain wood species (e.g. oak), is dangerous to your
health. Therefore it is necessary to always work with device for dust extraction.
● Do not use the sander for materials that contain asbestos.
● Wear protective half mask and anti-splinter goggles when sanding.
● Use of earmuffs is recommended.
● Fix processed material to prevent it from slipping. You can fix the material e.g. using a vice.
● Use sanding belts of recommended size only.
● Before starting to replace sanding belt, disconnect the sander from power supply by removing power
cord plug from mains socket.
● During operation, move the sander when holding it firmly with both hands.
● Always follow instructions contained in general and detailed safety regulations for using hand-held
power tools.
CAUTION! This device is designed to operate indoors.
The design is assumed to be safe, protection measures and additional safety systems are used,
nevertheless there is always a small risk of operational injuries.
CONSTRUCTION AND USE
Belt sander is a power tool driven by a single-phase commutator motor. The sander does not require earth
lead (insulation class II).
Belt sander is designed for surface sanding of wood products, polishing wood surfaces with lacquer coating,
fine polishing of lacquered metal surfaces, removal of rust or specks of lacquer before applying new lacquer,
finishing of concrete surfaces etc. Range of use covers repair and building works, woodworking and any
work from the scope of individual, amateur activities (tinkering).
Use the power tool according to the manufacturer's instructions only.
DESCRIPTION OF DRAWING PAGES
Below enumeration refers to the device elements depicted on the drawing pages of this manual.
1. Additional handle
2. Carbon brush cover
3. Dust extraction outlet
4. Driving belt cover
5. Wheel for sanding belt adjustment
6. Sanding belt
7. Main handle
8. Switch
9. Switch lock button
10. Guiding roller
11. Sanding belt tension lever
12. Wheel for adjustment of sanding belt speed
13. Locking lever for additional handle
14. Cover of sanding belt
* Differences may appear between the product and drawing.
BELT SANDER
59G394
DETAILED SAFETY REGULATIONS
12