GRAPHITE 59G717 Instrucciones De Uso página 12

• When changing the cutter bit, make sure its shank is held by at
least 20 mm of its length.
• Prior to cutting ensure that there is enough free space under
processed material to prevent contact of the cutter bit and
other objects.
• Check surface of the working area. Make sure there are no
unwanted objects (nails, screws etc.).
• Do not leave the router unattended when switched on.
• When the power tool is not in use, always keep it disconnected
from the power supply and stored in a place beyond reach of
children.
• Always disconnect the power tool from power supply prior
to commencing any activity related to its adjustment,
maintenance or operation.
• When cleaning the power tool do not use any solvent that
might damage plastic parts.
CAUTION! This device is designed to operate indoors.
The design is assumed to be safe, protection measures and
additional safety systems are used, nevertheless there is
always a small risk of injuries at work.
Explanation of used symbols
1 2
5 6
Read instruction manual, observe warnings and safety
1.
conditions therein.
Protection class 2.
2.
Use personal protection measures (protective goggles,
3.
earmuff protectors, anti-dust mask).
Disconnect the power cord before starting maintenance or
4.
repair.
Keep the tool away from children.
5.
Protect against rain.
6.
CONSTRUCTION AND USE
Plunge router is a hand-held power tool with protection class
2. It is driven by a single phase commutator motor installed
vertically related to processed surface. Power tools of this type
are widely used for cutting in wood and wood-based materials.
Range of use covers woodworking, wood flooring, decoration or
renovation and construction tasks.
Use the power tool in accordance with the manufacturer's
instructions only.
DESCRIPTION OF DRAWING PAGES
Below enumeration refers to the device elements depicted on
the drawing pages of this manual.
Handle
1.
Spindle lock button
2.
Spindle
3.
Spindle guard
4.
Base
5.
Plate
6.
3 4
12
Depth gauge stepped bumper
7.
Anti-dust shield of the body guide
8.
Depth gauge locking knob
9.
Depth gauge
10.
Depth gauge indicator
11.
Main scale
12.
Precision scale
13.
Knob for precise depth adjustment
14.
Plunge guide locking lever
15.
Indicator for precise depth adjustment
16.
Illumination
17.
Spindle spring
18.
Collet sleeve
19.
Fixing nut
20.
Locking knobs for edge guide bars
21.
Grooves for edge guide bars
22.
Switch
23.
Switch lock button
24.
Wheel for rotational speed control
25.
Edge guide bar
26.
Edge guide
27.
Knob for edge guide position adjustment
28.
Indicator of edge guide position
29.
Adapter fixing screw
30.
Dust extraction adapter
31.
Reducing connector
32.
Spike
33.
Butterfly nut of the spike
34.
Guide sleeve
35.
Guide sleeve collar
36.
Flat key
37.
* Differences may appear between the product and drawing
MEANING OF SYMBOLS
CAUTION
WARNING
ASSEMBLY / SETTINGS
INFORMATION
EQUIPMENT AND ACCESSORIES
Edge guide
1.
Spike for cutting along arcs
2.
Guide sleeve
3.
Dust extraction adapter with reducer
4.
Adapter fixing screws
5.
Collet sleeve
6.
Flat key
7.
PREPARATION FOR OPERATION
Spindle lock button can be used only for working tool installation
or removal. It cannot be used as a brake button when the spindle
is rotating. Otherwise the power tool may be damaged or the user
may be injured.
Do not tighten the spindle nut strongly before inserting a working
tool, this can damage the collet sleeve. Make sure that appropriate
collet sleeve is used each time the working tool is replaced.
- 1 pce
- 1 pce
- 1 pce
- 1 set
- 1 set
- 3 pcs
- 1 pce