Install Cover Strips And Water Diverter - Kohler K-702210 Guia De Instalacion

Cover
Strip
11. Install the Cover Strips and Water Diverter
- Rotate the previously cut cover strips into place from the inside of the shower. The cover strips are secured with
magnets.
- Place the water diverter on the inside of the bottom frame of the shower door.
- Drill three 1/8" holes through the bottom frame using the predrilled holes in the water diverter as a template.
NOTE: Drill only to the center of the extrusion (through two layers, approximately 5/16"/8mm deep).
- Secure the water diverter using three # 6 x 3/8" panhead screws.
Kohler Co.
Cover
Strip
Bottom
Frame
5/16" Drill Depth
11
Rotate
cover strip
into place
Water
Diverter
#6 x 3/8" Panhead Screw
A
1015287-2-