Locate Side Lite Glass Panel Or Strike Jamb - Kohler K-702210 Guia De Instalacion

7. Locate the Side Lite Glass Panel or Strike Jamb
NOTE: Installation instructions differ according to whether or not a side panel is part of the installation. If a side
panel is not being installed, follow the strike jamb installation steps.
Installation With a Side Panel
- Slide the side panel into the expander jamb with the magnet side of the panel toward the center of the opening
and facing the outside (dry side) of the shower.
- Make sure the tab on the bottom of the panel is inserted in the groove on the threshold.
NOTE: Do not secure the panel at this point.
Installation With a Strike Jamb (No Side Panel)
- Slide the strike jamb into the expander jamb with the magnet side of the strike jamb toward the center of the
opening and facing the outside (dry side) of the shower. The strike jamb should sit flat on the threshold.
NOTE: Do not secure the strike jamb at this point.
Kohler Co.
Side Panel
The magnet side
faces away from the
showerhead
Tab
Groove
7
A
1015287-2-