Emerson CF930LBS00 Manual Del Propietário página 19

6.5
Rotate the LED Light Fixture Assembly clockwise on
the Lower Housing by engaging the Two loosened
#8-32 x 10 mm Serrated Pan Head Screws onto the
Key Hole Slots (Figure 32).
Reinstall the previously removed #8-32 x 10 mm
Serrated Pan Head Screw (Figure 32).
Secure the LED Light Fixture Assembly by tightening
the Three #8-32 x 10 mm Serrated Pan Head Screws
(Figure 32).
A spare #8-32 x 10 mm Serrated Pan Head Screw
supplied in parts bag, if needed.
6.6
Place the Shade into the opening in the Lower Housing,
aligning the Three Flat Areas on the top edge of the
Shade with the Lower Housing Three Raised Dimples
and turn the Shade Clockwise until it stops (Figure 33).
NOTE: Periodically check that the Shade is seated
fully clockwise in the Lower Housing.
LED LIGHT
FIXTURE
ASSEMBLY
ROTATE CLOCKWISE
Figure 32
LED LIGHT
FIXTURE
ASSEMBLY
FLAT AREA (3)
ROTATE CLOCKWISE
Figure 33
Please contact 1-800-654-3545 for further assistance
19
RETIGHTEN TWO
#8-32 x 10 mm SERRATED
PAN HEAD SCREWS
REINSTALL ONE
#8-32 x 10 mm
SERRATED PAN
HEAD SCREW
RAISED DIMPLES (3)
SHADE
emersonfans.com
U.L. Model No.: CF930L