Operation Instruction
PAS (Pedal Assist System)
This E-bikes have an electric pedal assisted driving system. In EU countries, it is known
legally as "PAS" cylce or Pedal Assisted System.
The driving assisted system consists of a driving unit, a battery, a controller, and various
electronic components (harness wires, sensors and switches). It is important to know that
when the assistant system is turned on, the driving unit engages to provide power only
while you are pedaling. The amount of power provided by unit depends on your pedaling
force and the assistance model/level you set with handlebar control unit at any time,
if you stop pedaling, the drive assistant will disengage. In all models/levels, the driving
assisted system power reduces progressively and cuts off as the bike reaches a speed of
25km/h,(15.5mph), or sooner if you stop pedaling. The drive assist re-engages when speed
drops below 25km/h, (15.5mph) as long as the pedals are turning.
If the e-bike is equipped with mufti-function display (see photo at left.), Which has 3 levels
of PAS speed, power indicator on and light on/off.
Keep pressing '-' button to turn off PAS, you can pedal
the bike normally. The driving assistance system is not
activated.
Hold the '+' button on meter can get higher PAS speed
level. Each level of assist corresponds to a maximum
motor speed; at level 3, the motor runs at full power.
Overall range decrease at higher power levels.
ENGLISH
11