Riding Method; Riding Safely - Youin Amsterdam BK1000 Manual De Instrucciones

Operation Instruction

Riding method

Be familiar with all the spare parts of the E-bike and test all the electric functions before
riding. Make sure all the spare parts for the bicycle are in good condition, such as battery
power, and tire pressure. The detailed operation is as follows:
Start-up
Insert the key into power switch at the right side of battery box,
turn to "ON" position, if the power display lights on, then power supply is normal.
1. Start-up by pedal assistance: After turning on the power, you can also use your pedals
to start-up the E-bike, then you can control your speed with accelerator, as well as by
pedaling the bicycle faster. But please do not pedal too hard, in case it may damage the
components of e-bike since it is mainly motor driven.

Riding safely

Riding attention on the road
1,Speed should be increased slowly after start-up, in order not to waste energy and
damage electrical components, it is much better start-up with pedal assistance.
2,Please ride with the pedal assistance when climbing hills or steep terrain, in order to
prolong the service life of battery and the motor.
1). While staying safe, try to reduce frequent braking and start-up while riding, in order to
save energy.
2). To stop the E-bike, you can release the accelerator by turning clockwise, the speed will
slow down and stop.
3). Do not use the accelerator and brake together while riding, you can release the
accelerator first, and then brake. In order to not overload motor or damage other E-bike's
components.
4). Optimum weight is 75kg (including the rider weight), please do not overload.
5). Moreover a rear brake system has been installed to the e-bike, it will automatically cut
off power supply to the motor and slow down when you pull the brake, then the rear brake
in the back wheel will stop the E-bike.
8 YOU-Ride / Amsterdam