Saddle Position - Youin Amsterdam BK1000 Manual De Instrucciones

Operation Instruction

Saddle position

Correct saddle adjusted position is an important factor to get the best performance and
comfort from your E-bike.
If you find the saddle position is not comfortable, there are two adjustments.
A: Up and down adjustment.
Your leg length determines the correct saddle height.
The saddle is at the correct height if you can just reach the "lower" pedal with one heel
when you are seated on the saddle and the crank arms are parallel to the seat tube. To
check for correct saddle height, perform the following:
1. Sit on the saddle, and place one heel on a pedal.
2. Rotate the crank until the pedal with your heel on it is in the down position and the crank
arm is parallel to the seat tube. Your leg should be completely straight and just touching
the center of the pedal. If this is not the case, your saddle height needs to be adjusted.
B:Saddle tilt adjustment
Most people prefer a horizontal saddle; but some riders prefer to have the saddle nose
tilted slightly up or down. You can adjust saddle tilt by loosening the saddle quick release,
tilting the saddle to the desired position, and retightening the saddle quick release. Tight
enough so that you cannot move or jiggle the saddle. Very small changes in saddle position
can have a substantial effect upon performance and comfort. Consequently, whenever
you make a change to your saddle position, make only one directional change at a time,
and make the changes in small increments until you have found the position at which you
are most comfortable.
ENGLISH 17