General Description • Montage • Pin Connection - Rechner Sensors EasyMount Instrucciones

General description
The capacitive sensors, our abbreviation KAS, generate a capacitive field within the area of the active surface.
These sensors can be used for level controls of liquids, leakage detection or position controls of objects.
Ideal for level monitoring through non-metallic container walls. The product with a dielectric constant e
1.1 is detected and indicated as a switching signal, so that the level or the desired detection task can be
controlled via the connected PLC or control system.
Electronic circuits or PLCs can be activated directly by capacitive sensors.
Montage
Preferably for flush mounting in metal or other materials. These sensors can be
mounted close together and are specially designed for contact-less detection of solids or
liquids through non-metal containers (max. wall-thickness 4 mm).
Watertight
IP67
IP67 according to IEC 60529
The mounting is really simple.
• Easy to screw onto brackets or containers / 4 x M3
• By gluing to the container wall
• With cable tie
• Can be clicked into holders from our range of accessories
Pin connection
Pin connection for pluggable sensors (top view)
4 3
1 2
IP68
4 3
5
1 2
Watertight
IP68 according to IEC 60529
i
Pin 5 is only available for
sensors with ETW-function.
≥
r
13