Model C Features; Maintenance And Servicing - Integra Padgett C Manual De Operación

MODEL C FEATURES

• The Model C Air Dermatome is a precision instrument, built by skilled machinists with
materials of the highest quality.
• The on/off switch is thumb operated. Simply push it forward to operate in the pulse mode,
or to the rear for continuous mode.
• A substantial case with compartments for the instrument, width clips, air hose, screwdriver
and calibration instrument is included.
• Can take standard grafts 2, 3 or 4 inches wide (5.08, 7.62 or 10.16 cm).
• Completely sterilizable.
• Lightweight — 2 pounds (.91 kg).
• Lifetime lubrication.

MAINTENANCE AND SERVICING

The Integra Padgett Model C Air Dermatome does not contain any user serviceable parts. All
maintenance and servicing should be done at an approved Integra Padgett Dermatome Repair Center
(IPDRC). Failure to use authorized repair center voids the warranty
It is recommended that the complete dermatome (hand piece and air hose) be sent to the repair
center for servicing annually. A Return Material Authorization (RMA) number is required and may be
obtained by contacting Integra LifeSciences Customer Service before returning product.
The product is required to be properly cleaned and sterilized before it is returned to the repair
center with documentation verifying sterilization. Failure to sterilize the product will result in a
handling fee.
For Domestic returns
- Customer Service 800-654-2873 or 609-275-5363. Fax 609-275-5363
- Ship unit to:
For International Returns
- Customer Service +49 2102 5535 6150. Fax +49 2102 942 4872
- Ship unit to:
3
Integra Padgett Dermatome Repair Center (IPDRC)
1109 Valley Ridge Drive
Grain Valley, MO 64209 USA
Integra Gmbh
Technical Service and Repair
Gewerbepark Ratingen
Halskestrasse 9 D-40880
Ratingen, Germany