Dash Disassembly - Metra 99-5830B Instrucciones De Instalación

IMPORTANT NOTE: The factory radio
must be powered off before starting
disassembly. Omitting this step will
disable the menu function.
1. Open and lower the glove box.
Remove three 8mm bolts, from
inside the glove box facing up,
holding passenger airbag assembly
to dash and remove it. (Figure A)
2. Remove one 7mm screw from the
trim panel to the right of the radio,
unclip and remove it. The driver's
side panel does not need to be
removed, just unclipped so the
center panel is free. (Figure B)
(Figure A)

Dash Disassembly

(Figure B)
(Figure C)
99-5830
3. Remove (4) 9/32" screws securing
the radio/climate control panel to
the dash. (Figure C)
4. Unclip and remove the factory radio/
climate control panel. (Figure C)
5. Remove (4) 9/32" screws securing
the factory display. (Figure D)
6. Remove (4) 9/32" screws securing
the radio chassis. (Figure D)
7. Remove (4) 9/32" screws securing
the display to the display brackets
and keep display for kit assembly.
8. Unsnap, unplug, and remove the
traction control button and save for
kit assembly.
Continue to kit assembly
2
(Figure D)
(Figure E)