Kit Assembly - Metra 99-5830B Instrucciones De Instalación

ISO DIN radio provision
1. Attach the factory display to the radio
trim panel using the supplied (4) #8 x
3/8" Phillips screws. (Figure A)
2. Snap the factory traction control
button into the Metra kit.
3. Mount the pocket to the radio
brackets with the (4) #8 x 3/8" Phillips
pan head screws supplied. (Figure B)
4. Slide the radio into radio brackets and
secure with the screws supplied with
the radio. (Figure B)
5. Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from Metra
or AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
6. Mount the new radio assembly into
the dash, snap-in the radio trim panel,
and reassemble dash in reverse order
of disassembly.

Kit Assembly

(Figure A)
(Figure B)
99-5830
Double DIN radio provision
1. Attach the factory display to the radio
trim panel using the supplied (4) #8 x
3/8" Phillips screws. (Figure A)
2. Snap the factory traction control
button into the Metra kit.
3. Mount the DDIN radio to the radio
brackets using the screws supplied
with the radio. (Figure B)
4. Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from Metra
or AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
5. Mount the new radio assembly into
the dash, snap-in the radio trim panel,
and reassemble dash in reverse order
of disassembly.
Continued on back
3
(Figure A)
(Figure B)