Eschenbach visolux DIGITAL HD Manual De Instrucciones página 35

Setting the date and time
Select the symbol and then press the
time. Select the
the number of parameters shown in white. Select the
then use the
white. Select the
next parameter for setting. Select "24H" and then press the
to switch between 24-hour display and the 12-hour display usually used
in English-speaking areas.
Alternatively, you can also use the button
of a selected parameter and the
Use the symbol to return to the settings menu.
Updating the firmware
Select this symbol and then press the
version of firmware on the device and to update it if necessary. If you
register your visolux DIGITAL HD, you will be informed about any avail-
able software updates.
To update the firmware, please proceed as follows:
1. Connect the visolux DIGITAL HD to a PC using the USB cable sup-
plied. Ensure that the SD card is located in the card slot (l).
2. Switch the visolux DIGITAL HD on. The contents of the SD card will
now be displayed on the PC as the "ESCHENBACH" drive.
3. Use the connected PC to open the web address which was pro-
vided in the email informing you about the firmware update.
4. Download the firmware update and save it directly to the drive,
not in a drive subdirectory.
5. Disconnect the visolux DIGITAL HD from the PC using the "Safely
Remove Hardware and Eject Media" function - you can find the
symbol for this function in the operating system taskbar.
symbol and then use the
button to decrease the number of parameters shown in
symbol and then press the
button to set the date and
(d) to increase the value
button (f) to decrease it.
button to display the current
- 31 -
button to increase
symbol and
button to select the
button