Equipment And Accessories - GRAPHITE 59G812 Instrucciones De Uso

DESCRIPTION OF GRAPHIC PAGES
The below list refers to device components shown in the graphic pages of this instruction manual.
1. Transport handle
2. Handle grip
3. Switch lock button
4. Switch
5. Cutting disc guard lever
6. Spindle lock button
7. Cutting disc guard
8. Carbon brush cover
9. Head locking pin
10. Cutting depth limiter
11. Cutting depth limiter bolt
12. Guide locking knob
13. Guide
14. Head locking lever
15. Fence
16. Table extension
17. Limiter
18. Table extension locking knob
19. Mounting hole
20. Working table angle scale
21. Working table angle indicator
22. Automatic adjustment lever
* There can be differences between the drawing and real product.
DESCRIPTION OF USED GRAPHIC SIGNS
NOTE
WARNING
FITTING / SETTING
INFORMATION

EQUIPMENT AND ACCESSORIES

1. Dust bag
2. Socket wrench
3. Vertical clamp
Make sure the mitre saw is disconnected from power supply, before any adjusting or mounting
works are commenced.
HANDLING THE MITRE SAW
● Make sure the head is locked in the lowest position when carrying the mitre saw.
●
Make sure that the work table locking knob, head locking lever, and other safety parts are tightened
firmly.
INSTALLING THE MITRE SAW ON A WORKSHOP BENCH
It is recommended to fix the mitre saw to a workbench or a stand with the use of mounting holes (19)
designed for such purpose. They are located on the mitre saw base and guarantee safe operation and
eliminate risk of unwanted machine shifts during operation. The holes allow to use bolts with hexagonal
head and 8 mm in diameter.
23. Working table locking knob
24. Table insert
25. Working table
26. Laser unit
27. Fixed guard
28. Dust extraction connector
29. Dust bag
30. Vertical clamp locking knob
31. Vertical clamp arm
32. Vertical clamp arm locking knob
33. Workpiece fixing knob
34. Head tilt angle scale
35. Head tilt angle indicator
36. Battery compartment
37. Laser switch button
38. Laser
39. Laser unit mounting bolts
40. Centre plate mounting bolt
41. Centre plate
42. Adjusting bolt for 0º angle
43. Adjusting bolt for 45º angle
PREPARATION FOR WORK
19
- 1 pcs
- 1 pcs
- 1 pcs