Rear Panel Psu & Cooling Fan Leds; Controller Leds; Disk Drive Leds - Vess R2000 Serie Guia De Inicio Rapido

REAR PANEL PSU & COOLING FAN LEDS
The LEDs on the rear panel include LEDs on each cooling fan and each power supply. These LEDs will light green to indicate normal
operation. A red or amber LED indicates a problem or unit failure. See the Product Manual for a complete description of LED indicators.
Figure 23: LEDs on Power Supply and Cooling Units

CONTROLLER LEDS

When boot-up is finished and the Vess R2600 subsystem is functioning normally, the Controller status LED displays green continuously;
the Management port LEDs display green or flash depending on your network connection; the FC, iSCSI, and SAS Expansion LEDs
display green or flash during port activity.
LED
SAS Expansion
Controller Status
Dirty Cache
USB
iSCSI (2 above each port)
FC ports
Figure 24: Vess R2600fi controller LEDs
SAS
Expansion
LED

DISK DRIVE LEDS

There are two LEDs on each Drive Carrier. They report the presence of a disk drive, activity of the drive, and the drive's current condition.
Figure 25: Vess R2600 drive carrier LEDs
If there is a disk drive in the carrier, the Power/Activity LED displays Blue. If not, the Power/Activity LED remains dark. The
Power/Activity LED flashes Blue during drive activity.
The Disk Status LED displays Green when a drive is configured.
PSU 1 LED PSU 2 LED
Description (refer to product manual for more details)
Lights green when connected, flashes green when active.
Green light indicates controller is operational.
Lights amber if cache is dirty, otherwise dark.
Green light indicates a connection, dark when not connected.
Left LED lights green when connected, flashes green when active, dark if not connected. Right LED
indicates connection speed, green is 100 Mbps, amber is 1000 Mbps.
See product manual.
Dirty
Controller
USB
Cache
Status
LED
LED
Cooling Unit 1 LEDs
BBU (top)
Cooling Unit Fan Status (bottom)
iSCSI port LEDs
FC Port LEDs
Drive Status
Power/Activity
15