Horizon Global 25000 Instrucciones De Instalación página 4

1. Remove underbody panel - Using a flat head screwdriver, 10 mm socket, and 12 mm socket, remove (5) rivets, (2) nuts, and (1) nut respectively from driver side
underbody panel. Remove the panel.
2. Lower exhaust– Using an exhaust hanger removal tool, lower muffler by removing (2) rearmost rubber hangers. A spray of lubricant or soapy water on rubber
hangers makes them slide off metal pins more easily. NOTE: Be sure that exhaust is properly supported before removing rubber hangers.
©2021 Horizon Global Americas Inc. - Printed in Mexico
Figure 3
Sheet 4 of 21 25000NP 01-20-21 Rev. A