Claw jaws SKB – important information
Intended purpose:
Attention:
All machine-specific accident prevention regulations must be complied with.
If there is a need for replacement, only components authorised by the manufacturer may be used.
Clamping the work pieces:
Risk of breakage:
Maintenance:
To avoid loss of clamping force, one needs to clamp 2 x in the case of vices with way-dependent
power booster, e.g. toggle lever, hydraulic unit, to balance material displacement
Do not use the hand
crank for tension, but
only use it for the
span setting.
Risk of injury by tearing the
workpiece. Fracture or
deformation of the
workpiece and vice
possible!
16