Publicidad
Idiomas disponibles
Idiomas disponibles
In case of breakdown or poor function,
turn off the unit. Never tamper with the unit. Contact
only professionally qualified personnel.
Only the manufacturer or an authorized service center
can make repairs and only using original spare parts.
Non compliance with the above can compromise
machine safety.
Upon installation, the qualified electrician
must arrange for an omnipolar switch, as called for
by the safety regulations in force; when open, the
contacts must be 3 mm or more apart.
To prevent dangerous overheating, it is
advisable to fully extend the power supply cord.
Never block
the intake and/or heat
dissipation grills, in
particular those for the
cup warmer.
The user must never replace the unit's
power supply cord. If this cord is damaged, turn off
the unit and have it replaced by a professionally
qualified technician.
Should you decide to stop using this type
of unit, we suggest you render it inoperable by
unplugging it and cutting the power supply cord.
Caution: DANGER OF POLLUTION
Never dispose of the machine in the environment: to
dispose of the machi-
ne, contact an authori-
zed center or contact
the manufacturer for
pertinent indications.
16
To facilitate aeration of the unit, position
the aeration portion of the machine 15 cm from walls
or other machinery.
Once you have started washing the
machine, complete the job or residues of detergent
could be left inside the dispensing assembly.
Caution: DANGER OF INTO X I C AT I O N
Be extremely careful when using the
steam nozzle. Never
place your hands
under the nozzle and
never touch it right
after use.
Caution: DAN-
GER OF BURNS
Remember that to install, maintain,
unload and regulate the unit, the qualified operator
must always wear work gloves and safety shoes.
Publicidad
