Nuova Simonelli Jazz basic Manual De Instrucciones página 23

STOP
To stop the machine, press machine swit-
ch (1) in "O" position, all the indicator
lights will go off.
Note: in the case of long intervals and for
safety reasons, the plug is best taken out
of the socket.
CLEANING
Excluding dispensing unit cleaning, as
shown on the following table, any clea-
ning must be done in zero power condi-
tion (plug disconnected from mains) and
with the hot parts at environment tempe-
rature, according to this table.
1) Cleaning the nozzle
Use a cloth slightly dampened in hot
water and/or neutral detergent.
2) Cleaning the external surface of the
machine
- To clean the external surface of the
machine, never use solvents but
only a cloth slightly dampened with
hot water and neutral soap.
3) Cleaning the grid.
- Clean the grid with hot water and
soap using a brush.
N° TYPES OF CLEANING N° part
1 Cleaning the nozzle
2 Cleaning the external part of the machine
3 Cleaning the grid
4 Cleaning the water collection tray
5 Cleaning the water tank
6 Cleaning the dispensing unit
4) Cleaning the liquid holder tray
- Clean the liquid holder tray with hot
water and soap, if necessary using a
brush.
NOTE: the liquid holder tray can be
washed in a dishwasher
IMPORTANT: never use solvents.
5) Cleaning the water tank
- Use soap and water and rinse well.
NOTE: if the water has left any undesi-
red deposits, wash using a tube brush.
7 ) Cleaning the dispensing unit
- Lower the door (17) without inserting
the pad;
- Press the coffee dispensing button
(6) and allow the water to exit from
the nozzle for 15/20 seconds;
- Press the coffee dispensing button
to stop the coffee supply.
FREQUENCY
immediately after use daily
13
14
14
15
9
MAINTENANCE
If the cleaning operations are performed
as described above, no maintenance jobs
are required. For all jobs that need doing
on the machine, contact the dealer that
sold it to you.
weekly
23