Kalorik FT 47456 Manual De Instrucciones página 19

before cleaning. Allow all parts of the appliance to cool down
completely.
NOTE:
Do not immerse the power cord with plug, magnetic plug or
‒
appliance into water or any other liquids. Do not use abrasive
cleaners, steel wool or scouring pads. Dry all parts thoroughly
after cleaning, before using or storing the appliance. Ensure
that no water enters the appliance housing.
Do not attempt to attach the magnetic plug permanently to
‒
the appliance.
• Ensure the oil container is in place.
• Place the basket on a clean, flat and heat resistant surface.
Danger of burns!
Ensure the basket cooled down completely before touching its
‒
surface and attempting to remove the basket handle.
Ensure the oil cooled down completely before emptying the oil.
‒
• Remove the basket handle from the basket.
• Remove the control panel assembly from the oil reservoir. Carefully
clean the control panel assembly and immersion heater with a
damp cloth.
• Remove the oil reservoir from the housing.
• Clean the appliance housing with a damp cloth.
• Wash the lid, basket, basket handle, oil reservoir with hot soapy
water. Rinse and dry carefully. Baskets are dishwasher safe.
• Dry all parts thoroughly after cleaning and before using the
appliance again.
NOTE:
If the oil container needs to be cleaned, ensure it is empty
‒
before attempting to clean. Wash with hot soapy water. Rinse
and dry carefully.
Dry all parts and surfaces thoroughly before use. Make sure that
‒
all parts and surfaces are completely dry before connecting the
appliance to a wall outlet. Even a small amount of water can
cause severe splattering of hot oil.
www.KALORIK.com
19
FT 47456 - 200605