Using The Appliance - Kalorik FT 47456 Manual De Instrucciones

1. Place the pegs into the two holes in the basket bracket. (The
pegs are the ends of the two basket handle bars)
2. Align for the bar to be inside upper brackets and let go.
NOTE:
YOUR APPLIANCE IS EQUIPPED WITH A SAFETY SWITCH LOCATED
‒
ON THE CONTROL PANEL ASSEMBLY. IF THE CONTROL PANEL
ASSEMBLY IS NOT PLACED PROPERLY IN ITS POSITION, THE
APPLIANCE WILL NOT OPERATE.
Incorrect assembly may lead to an unstable setup and might
‒
cause injuries.

USING THE APPLIANCE

This appliance can be used for frying food such as French fries, chicken
or fish pieces (see Recommended Frying Times and Temperatures).
NOTE:
The appliance has a rated power of 1650W. Before plugging it
‒
into the wall outlet, ensure that the electrical circuit is not
overloaded with other appliances. This appliance should always
be operated on a separate 120V ~ 60Hz wall outlet.
Make sure the appliance is switched off before connecting it to
‒
a wall outlet.
• Place the appliance on a clean, flat and heat-resistant surface.
When using the appliance on wooden surfaces, use a heat resistant
mat to protect the wood from damages. Ensure a minimum
distance around the appliance of at least 4 inches to other objects,
cupboards and walls.
Danger of burns!
Never refill the oil reservoir during use or while hot. Always allow
‒
the appliance to cool down completely. Do not mix new oil with
old oil.
WARNING:
DO NOT OVER OR UNDER FILL. The minimum oil capacity is 2.8L
‒
(MIN), the maximum oil capacity is 4L (MAX). Ensure the oil level
always remains between the MIN and MAX marking.
www.KALORIK.com
9
FT 47456 - 200605