Cleaning; Disinfection; Maintenance - MSA alphaFP pro Manual De Funcionamiento

MSA
4.2

Cleaning

(1) To clean use lukewarm water and mild detergent.
(2) Rinse the equipment with clear water.
(3) Dry before storing.
The harness must be dried by natural means, not close to a fire or other

sources of heat.
4.3

Disinfection

Only substances that will not have any effect on the synthetic materials in the prod-
uct may be used for disinfection.
4.4

Maintenance

Repairs and changes to the product must only be made by the manufacturer.
Lifespan
With seldom use, the lifespan may be up to 10 years. Intensive use will reduce
lifespan considerably. The critical factor in determining service life is only the con-
dition of the product at the time the check is performed in compliance with the de-
fined criteria for testing and/or rejecting the product.
Plastic or textile products must generally be taken out of use 10 years after the date
of manufacture.
Damaged products or products that have undergone strain must be removed from
use immediately
It is not possible to make any general statement about the service life of the product
since it depends on different factors such as:
- Storage conditions
- UV radiation
- Intensity and frequency of use
- Care
- Effects of weather such as temperature, moisture, snow; environment with salt,
sand, chemicals, etc.
This list is not complete, other means of damage can apply.
The service life may be reduced under unusual circumstances to a single use or the
equipment may even become unusable before the first time it is used [for example
damage during transport].
GB
alpha FP pro/alpha FP basic
Maintenance and Cleaning
19