Triton 4739 Manual De Usuario página 32

OPERATION
PATIENT PREPARATION CONTINUED
5. Position the patient on the appropriate type of table in accordance
with the instructions supplied with the table.
•
Use only tables, stands, power cords and accessories that are
specially designed for the Triton traction unit. Do not use
accessories manufactured by other companies on the Triton traction
unit. Chattanooga Group is not responsible for any consequence
resulting from using products manufactured by other companies.
The use of other accessories or cables may result in increased
emissions or decreased immunity of the Triton traction unit.
6. Fit the appropriate traction harness on the patient by following the
fitting instructions supplied with the type of harness to be used.
7. Tighten any slack in the harness that may have occurred during
positioning so that it fits the patient according to the manufacturer's
instructions.
8. Push and hold the Rope Release button on the Touch Screen and
slowly pull the end of the Traction Cord out from the traction unit.
9. Attach the Accessory Clip to the connection point of the traction
harness, according to the manufacturer's instructions.
• In the event of a loss of power to the unit or when quick release is
needed, traction tension should only be released by having the
patient move towards the traction head to release the tension on
the rope. Once the tension on the rope has been released, loosen the
patient harness adjustment straps.
29
Triton® Traction