Dts Pull Patterns (If Applicable) - Triton 4739 Manual De Usuario

OPERATION
DTS PULL PATTERNS IF APPLICABLE
The DTS Pull Patterns, only available with Model 2841 Triton DTS
Traction Unit with sEMG, offer a selection of various intermittent traction
programs. It is up to the clinician to determine the applicability and
appropriate parameters of the presets as applied to the patient.
Installing DTS Software Upgrade Card
Turn the traction unit off with the On/
Off Switch on the back of the unit.
Remove the Multimedia Card (MMC)
from the front of the traction unit.
NOTE: The Multimedia (MMC) Card can
be discarded once removed.
Insert the DTS Software Upgrade Card
into the Multimedia Card (MMC) Port.
Turn the traction unit on with the On/
Off Switch on the back of the unit.
A message will display on the Touch
Screen User Interface saying, "Unit has
been changed to a DTS unit. Touch
anywhere to continue."
Selecting a DTS Pull Pattern
52
Triton® Traction
From the Home Screen, press the DTS
Pull Pattern button.
Choose the desired body area for the
DTS Pull Pattern.
Select one of the five desired DTS Pull
Patterns.
NOTE: The DTS Pull Pattern parameters
can be edited and saved as the
default Pull Pattern or as a User
Protocol. (See the User
Protocol Section on Pages
47 - 48 for more information)