Saving Treatment To A Patient Data Card - Triton 4739 Manual De Usuario

OPERATION

SAVING TREATMENT TO A PATIENT DATA CARD

The Triton traction unit incorporates a Patient Data Card interface that
allows transfer of patient therapy data from the unit to the Patient Data
Card. The unit allows storage and recall of the following patient session
data onto the Patient Data Card: all therapy session parameters, before
and after Patient Pain Profiles, and Session Notes (stored on card via
PC only). Each Patient Data Card can store multiple sessions and each
session can be recalled within the unit.
New Patient Data Card Setup
Insert a new Patient Data Card (with the
gold chip facing up) into the Patient
Data Card port located on the front of
the traction unit.
NOTE: Insert the Patient Data Card
before treatment.
Press the Clinical Resources button on
the front of the traction unit.
Press the Edit Current Pain Profile button
located in the Patient Card section of
the menu.
Enter the following information under
the Pain Before Treatment column:
42
Triton® Traction
Pain Scale - There are eleven pain scale
settings to choose from a numeric scale
of 0 to 10. Press the arrows left to right
from what the patient describes pain
from being No Pain (0) to Worst Pain
Possible (10).
NOTE: If the patient is unsure of rating
pain from a numeric scale, a
visual pain scale is available.
Toggle the middle button
between the left and right
arrows to choose between
a Numeric or a Visual Analog
Scale. Press the arrows left to
right to move the visual bar from
what the patient describes
pain from being No Pain to Worst
Pain Possible.
Pain Type - There are eleven pain
types to choose from based on how
the patient describes pain: Numbing,
Dull Ache, Throbbing, Pulsing, Tingling,
Nagging, Pinching, Burning, Shooting,
Stabbing, Radiating, or None Selected.