Vibration Information - Worx WX661 Traducción De Las Instrucciones Originales

Ocultar thumbs Ver también para WX661:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 25

VIBRATION INFORMATION

Vibration total values (triax vector sum) determined
according to EN 60745:
Typical weighted
vibration
The declared vibration total value and the declared
noise emission value may also be used in a prelimi-
nary assessment of exposure.
WARNING: The vibration and noise
emissions during actual use of the power tool
can differ from the declared value depending
on the ways in which the tool is used especially what
kind of workpiece is processed dependant on the
following examples and other variations on how the
tool is used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well
maintained.
The use the correct accessory for the tool and
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any
anti vibration and noise accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration
syndrome if its use is not adequately managed.
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the
operating cycle such as the times when the tool is
switched off and when it is running idle but not
actually doing the job. This may significantly reduce
the exposure level over the total working period.
Helping to minimise your vibration and noise
exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these
instructions and keep well lubricated (where
appropriate).
If the tool is to be used regularly then invest in anti
vibration and noise accessories.
Plan your work schedule to spread any high vibration
tool use across a number of days.
Belt sander
Vibration emission value
a
= 9.2m/s
2
h
Uncertainty K = 1.5m/s²
ACCESSORIES
Dust bag
Sanding belt (80 grit)
35mm Dust extraction adapter
32mm Dust extraction adapter
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to
the accessory packaging for further details. Store
personnel can assist you and offer advice.
1
2
1
1
7
EN

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Wx661.1

Tabla de contenido