Technical Data; Noise And Vibration Data - Worx WX653 Manual Del Usuario

TECHNICAL DATA

Type WX653 WX654 (650~659-designation of machinery, representative of Random
orbital sander)
Rated voltage
Rated input power
Rated no load speed
Belt size
Orbital diameter
Protection class
Machine weight

NOISE AND VIBRATION DATA

A weighted sound pressure
6
A weighted sound power
Wear ear protection when sound pressure is over 80dB(A)
Typical weighted vibration
The declared vibration total value may be used for comparing one tool with another, and may
also be used in a preliminary assessment of exposure.
WARNING: The vibration emission value during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used dependant on the
following examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately
managed.
Random orbital sander
WX653
220-240V~50/60Hz
360W
7000-12000opm
125mm
2.1kg
WX653
L : 78.6dB(A)
PA
K : 3.0dB(A)
PA
L : 89.6dB(A)
WA
K : 3.0dB(A)
WA
a = 6.47m/s²
h
K = 1.5m/s²
WX654
230-240V~50Hz
480W
4000-11000opm
150mm
2.5mm
/II
2.3kg
WX654
L :83.4dB(A)
PA
K : 3.0dB(A)
PA
L : 94.4dB(A)
WA
K : 3.0dB(A)
WA
a = 9.19m/s
h
K = 1.5m/s²
2
EN