OHAUS TC3RS Manual De Instrucciones página 8

6
3.1 Overview of Controls and Display Functions (Cont.)
No. Designation
4 Numeric Keypad
5 Data button
6 Clear button
7 M+ button
8 M- button
9 Enter button
10 TARE button
11 LIBRARY Save button
12 SAMPLE Menu button
PRINT Units button
13
ON/ZERO Off button
14
Function
Enter specific values for tare, APW and other data entries.
Selects between data modes in the Data display.
In edit mode, serves as a "Go Back" or backspace key.
During editing, clears the blinking entry.
Adds the displayed quantity into the accumulating memory.
During editing, selects the next higher option or number.
Subtracts the keyboard entry from the accumulating memory. In sampling mode,
enters negative sampling.
During editing, selects the next lower option or number.
Enters edit function of current mode. If current mode does not support edit func-
tions, an error beep will occur.
In edit mode, accepts entry.
Tares the weight on the pan or accepts the keypad tare entries.
Short press displays Library ID (blinking) and the part number. Repeat press
returns to weigh/count mode.
Long press (3 seconds) saves library changes.
Short press enters the sampling mode.
Long press (3 seconds) enters scale setup menu. In menu mode, a short press
will return to weigh mode.
Short press sends data to RS232 port.
Long press (3 seconds) steps through active weigh units. Release on desired
unit.
Short press turns the scale on or zeros the display.
Long press (3 seconds) turns the scale off.
Trooper Count Scale