Count Menu - OHAUS TC3RS Manual De Instrucciones

Trooper Count Scale
4.7 Print Menu (Cont.)
Procedure (Cont.)
Select stability required for printing at 0.5d, 1d, 3d or
OFF. OFF allows the printing when the weight is not
stable. In LFT mode, stability is 1d.
Print Header - Allows printing of preset header that
includes OHAUS, Model No. and unit serial number.
Select ON or OFF.
Printout Style - See section 3.7.2 for examples. Se-
lect COL (24 column) or LINE (line).

4.8 Count Menu

Procedure
If you have just finished changing settings in the Print
menu, press the Data button to go back to the PRINT
MENU. Press M- button to advance to the Count menu,
then press Enter button. Navigate through the menu
as explained in section 4.3.1.
Auto Add - Auto Add instructs the operator to add x
pieces to reference count (see section 3.6). Select
ON or OFF.
Print Clear - When Print clear is set to ON, the Scale
prints the accumulated count memory and then clears
the accumulated memory when the PRINT Units but-
ton is pressed. Select ON or OFF.
Auto Reference Optimization - If additional reference
pieces less than or equal to the existing reference count
are added to the pan, the Scale will recompute the
APW based on the new reference weight (see section
3.5). Select ON or OFF.
Memory Change - A 10d weight change is required
before the accumulated memory can be changed by
pressing M+ or M-. Select ON or OFF.
WEIGHT
kg g
lb oz Net B/G %Ac
WEIGHT
kg g
lb oz B/G %Ac
Net
WEIGHT
kg g
lb oz Net B/G %Ac
WEIGHT
kg
g
oz
lb Net B/G %Ac
WEIGHT
kg g
lb oz Net B/G %Ac
WEIGHT
kg
g
oz
lb Net B/G %Ac
WEIGHT
kg g
lb oz Net B/G %Ac
WEIGHT
kg
g
lb oz B/G %Ac
Net
DATA COUNT
<
T PT APW MR M
DATA COUNT
<
T PT APW MR M
DATA COUNT
<
T PT APW MR M
DATA COUNT
<
T PT APW MR
M
DATA COUNT
<
T PT APW MR M
DATA COUNT
<
T PT APW MR
M
DATA COUNT
<
T PT APW MR M
DATA COUNT
<
T PT APW MR M
21
>
PCS
>
PCS
>
PCS
>
PCS
>
PCS
>
PCS
>
PCS
>
PCS