Setup; Setup Protection; Menu Structure - OHAUS TC3RS Manual De Instrucciones

16

4. SETUP

For first time setup, step through all menus and set the parameters as desired.

4.1 Setup Protection

The Trooper Count Scale is equipped with menus which permit certain functions to be locked out (not changed) during
operation. If you intend to physically lock out changes to the setup selections, you will need to access the hardware
Lock Switch located on the main circuit board following the setup procedure.

4.2 Menu Structure

The following table illustrates the menu structure in the Trooper Count Scale.
CAL
Span
Lin
NOTE: Bolded items indicate factory defaults.
* LFT on setting
SETUP READ
Reset Unit g
yes,no on, off
LFT Unit kg
on,off (1000g)
on, off
Cal Unit
lb, 1000g Unit lb
on, off
Cal Point
1/3, 2/3, Full Unit oz
on, off
Beeper
All, signal, off Auto Zero
Tracking
Backlight 0.5*, 1, 3, off
on, off, auto
Auto Off Timer
on (5 min), off
Library
On,OFF
PRINT
COUNT
Baud Rate
1200, 2400, 4800,
9600, 19200
Data Length
7,8
Parity Bit
none, Even, Odd
Print Part No.
on, off
Print COUNT
on, off
Print APW
on, off,
Print Net
on, off
Print Tare
on, off
Print TOTAL pcs
on, off
Print Gross
on, off
Print On Stable
off, 0.5d, 1d*, 3d
Print Header
on, off
Print STYLE
Col, Line
Trooper Count Scale
LOCSW
Auto Add CAL Lock
off, on
on, off
Setup Lock
Print Clear
on, off
on, off
Read Lock
Auto Opt.
on, off
on, off
Print Lock
M requires on, off
10d chg.
on, off
Count Lock
on, off
Library
Lock
on, off