Saving Library Data; Saving Library Data In Another Location - OHAUS TC3RS Manual De Instrucciones

Trooper Count Scale
3.4.2 Entering Data Directly into Library (Cont.)
Press M+ to advance to count. Count is the accumu-
lated piece count in memory. Press Enter button to
edit count value.
Using the numeric keypad, enter the desired count.
The sample illustrates 250 pieces. Press the Enter
button to accept.
To exit library editing, momentarily press the Library

3.4.3 Saving Library Data

Temporary changes to a library location need to be
permanently saved or the changes will be lost when
the scale is turned off. The scale will recommend
saving temporary changes when the library location
is changed or when the scale is turned off.
To save the settings, use a long press on the
Library Save button. The library location (ID 22)
and UPDATE YES is displayed.
Press Enter button to accept save location. Press
Enter button again to save changes.
The UPDATE DONE display confirms a successful save.

3.4.4 Saving Library Data in Another Location

You have the option of copying all data from one li-
brary location into another library location. In the
following example, we will save data from library lo-
cation 22 to 52. Library 22 is shown.
Make a long press on LIBRARY Save button until
display indicates UPDATE.
Enter the desired new location directory using the nu-
meric keypad or by pressing the M+ button to ad-
vance to the next open location. The sample is loca-
tion 52. Press the Enter button.
WEIGHT
kg g
oz
lb Net B/G %Ac
WEIGHT
kg g
lb oz Net B/G %Ac
WEIGHT
kg g
lb oz Net B/G %Ac
BLINKING
WEIGHT
kg g
lb oz Net B/G %Ac
WEIGHT
kg
g
lb oz B/G %Ac
Net
WEIGHT
kg
g
oz
lb Net B/G %Ac
BLINKING
WEIGHT
kg
g
oz
lb Net B/G %Ac
BLINKING
DATA COUNT
<
PT APW MR
T M
BLINKING
DATA COUNT
<
T PT APW MR M
BLINKING
DATA COUNT
<
T PT APW MR M
DATA COUNT
<
T PT APW MR M
BLINKING
DATA COUNT
<
T PT APW MR M
DATA COUNT
<
PT APW MR
T M
DATA COUNT
<
T PT APW MR
M
13
>
PCS
>
PCS
>
PCS
>
PCS
>
PCS
>
PCS
>
PCS