Using The Machine - Rubi Rubimix-7 Instrucciones Originales

CONTENTS
A. USING THE MACHINE
• COMPONENTS / MACHINE ELEMENTS
B. SAFETY WARNINGS
• SYMBOLS
• PRECAUTIONS
• WORKSPACE
C. INSTRUCTIONS FOR USE
• IINSTRUCTIONS
• STARTING
• CLEANING AND MAINTENANCE
A. USING THE MACHINE
The Domix has been designed to mix building materials like
powder ; mortar , plaster , adhesives and paint/lacquers or other
similar materials that do not contain solvents.
COMPONENTS/ MACHINE ELEMENTS
1 Handle
2 Power- on / off.
3 Electronic Speed controller
4 Unlock button switch
5 Protective case engine
6 Air vent.
7 Toolholder.
8 Wrench ( 19 mm)
9 Spanner (22 mm)
10 Mixing head Ø 120 mm mortar
11 Set of replacement brushes
12 Instruction Manual
B. SAFETY INSTRUCTIONS
SYMBOLS
Read the instruction manual
Wear safety glasses
CE Mark
WEEE Compliance
PRECAUTIONS
General safety precautions for tools.
¡WARNING!
When power tools are used, you should always follow basic safety
precautions to reduce the risk of fire, electric shock and personal
injury. Read these instructions carefully before using this product and
keep for your records.
English
TRANSLATION OF THE ORIGINAL
D. DECLARATION OF CONFORMITY
H. ELECTRIC CIRCUIT
I. WARRANTY
1. Security of the work area
a. Keep the area clean and well lit.
Cluttered and dark work areas invite accidents.
b. Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or dust
atmospheres.
Power tools create sparks which may ignite the dust fumes.
c. Keep away from children and curiousity while operating
a power tool.
Distractions can cause you to lose control.
2. Electrical safety
a. The plug on the machine must match the base of the
socket. Never modify the plug in any way.
Do not use use any adapter plugs with grounded power tools .
Unmodified plugs and matching bases will reduce the risk of electric
shock.
b. Avoid body contact with earthed surfaces such as pipes,
radiators, cookers and refrigerators.
There is an increased risk of electric shock if your body is grounded.
c. Do not expose power tools to rain or wet conditions.
The water entering the tool will increase the risk of electric shock.
d. Do not misuse the cord/cable. Never use the cord/cable
for carrying , lifting or unplugging the power tool.
Keep cords/cables away from heat, oil , sharp edges or moving parts
Damaged or entangled cords increase the risk of electric shock.
e. When operating a power tool outdoors , use an extension
cord suitable for outdoor use.
The use of an extension cord suitable for outdoor use reduces the
risk of electric shock.
f. If the use of a tool in a damp location is unavoidable , use
a protected residual current device ( RCD ) power.
Use of an RCD reduces the risk of electric shock.
3. Personal safety
a. Be alert, watch what you are doing and use common
sense when operating a power tool.
Do not use a power tool while tired or under the influence of
drugs, alcohol or medication. A moment of inattention while
operating power tools may result in serious personal injury.
b. Use personal protective equipment.
Always wear eye protection and use appropriate safety equipment
such as dust mask, non- skid safety shoes, hard hat, or hearing
protection to reduce personal injury risk.
c. Avoid accidental starting.
Make sure the switch is in an "open" position before connecting to
the network and / or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or plugging in
power tools that have the switch to " closed" position can cause
accidents.
d. Remove any adjusting key or wrench before starting the
machine.
A keychain attached to a rotating part of a power tool power tool
may result in personal injury.
5.