Stryker SIDNE Visum Guia Del Usuario página 24

Operating Notes
1. While the camera is executing any of the following voice commands
initiated by the SIDNE® interface—Zoom in, Zoom out, Focus in,
Focus out, Shutter brighter, Shutter darker—the command will continue
executing until
• the stop command or another camera command has been issued
• it has reached its maximum or minimum limit
• the command times out.
2. Issuing a camera command other than stop will stop the current execution
and start the execution of the new command issued.
3. Please note that there is no indication on the SIDNE® Interface (Voice
and Tablet) regarding the maximum and minimum limits for the following
commands:
• Brightness/Darkness
• Focus In/Out
• Zoom In/Out
The only indication when these quantities have reached their limits will
be when the appropriate buttons/commands are grayed out.
4. A status bar will be displayed on the monitor when using voice control.
The center section shows the status of the camera focus and camera shutter
modes, either automatic, manual, or off.
24