Installation; Installation Location; Unpacking The Equipment; Acclimatizing The Device - Minebea Intec Combics CAIXS2 Advertencias De Instalación Y De Seguridad

4
Installationsanleitung CAIXS2

Installation

Installation
When a CAIXS2 indicator is ordered with special equipment, the desired options
come pre-loaded from the factory.
Storage and Shipping Conditions
Excessive vibrations may compromise the safety of the equipment.
3
– Do not expose the equipment to unnecessarily extreme temperatures,
moisture, shocks, blows or vibration.
– Permissible storage temperature: -20 to +60°C.

Installation Location

Avoid adverse influences at the place of installation:
– extreme temperatures (operating temperature: -10°C to +40°C)
– aggressive chemical vapors
– extreme moisture (according to IP protection rating).

Unpacking the Equipment

After unpacking the device, check it for any visible damage as a result of
t
rough handling during shipment.
y If you detect any damage, proceed as directed under "Safety Inspection" in
the chapter entitled "Care and Maintenance."
Save the original packaging for any future transport.
t
Unplug all connected cables before packing the equipment.
Checking Package Contents
– Indicator
– Operating instructions
– Options (special accessories) as listed on the bill of delivery

Acclimatizing the Device

Condensation can form on the surfaces of a cold device when it is brought into a
substantially warmer area.
Allow the device to acclimatize for about 2 hours at room temperature,
t
leaving it unplugged from the supply voltage.