Operating Instructions; Care And Maintenance; Troubleshooting - Harbor Breeze 00593 Manual De Instrucciones

FINAL INSTALLATION
16. Install the previously removed screw (step 14, page
13) and securely tighten all the screws.

OPERATING INSTRUCTIONS

1. PULL CHAIN:
• Attach fan pull chain extension (BB) and light
pull chain extension (CC).
NOTE:
• The fan pull chain is for motor speed control:
High, Medium, Low and Off.
Pull chain once for each position.
• The light pull chain controls the light fixture
either ON or OFF with each pull of the chain.
16
14

CARE AND MAINTENANCE

• Important: Shut off main power supply before beginning any maintenance.
• Do not use water or detergents when cleaning the fan or fan blades. A dry dust cloth or lightly
dampened cloth will be suitable for most cleaning.
• Clean fan housing with only a soft brush or lint-free cloth to avoid scratching the finish. Clean
blades with a lint-free cloth. You may occasionally apply a light coat of furniture polish to blades
for added protection.
• At least twice a year, tighten all screws and lower canopy to check mounting bracket screws and
downrod assembly.
• Bulb replacement: Use B10 5 watt max. medium-base E26-type LED bulbs.

TROUBLESHOOTING

PROBLEM
Fan does not move.
Noisy operation.
BB
Excessive wobbling. 1. The blades are loose.
CC
POSSIBLE CAUSE CORRECTIVE ACTION
1. Chain switch is "off". 1. Pull chain switch.
2. Faulty wire connection. 2. Turn power off. Loosen canopy,
3. Reverse switch not engaged.
3. Push switch firmly either way.
1. Blades are loose. 1. Tighten all blade screws.
2. Cracked blade. 2. Replace blades (call customer
3. Unapproved speed control.
3. Replace with an approved speed
1. Tighten all blade screws.
2. Blade arms incorrectly attached. 2. Reinstall blade arms.
3. The fan is not securely mounted. 3. Turn power off. Carefully loosen
4. Fan too close to vaulted ceiling.
4. Lower fan or move it to another
15
check all connections.
service).
control device.
the canopy and remount securely.
location.