Operating Instructions - Harbor Breeze 40101 Manual De Instalación

FINAL INSTALLATION
10. Secure the switch housing (G) to the fitter plate (I)
using the switch housing screws (NN) preassembled
on fitter plate (I). Then, attach appropriate pull chain
extension (CC) to fan pull chain.
Hardware Used
Pull Chain
CC
Extension
Switch Housing
NN
Screw

OPERATING INSTRUCTIONS

1. The pull chain labeled FAN has four positions to
control fan speed. One pull is HIGH, two is MEDIUM,
three is LOW and four turns the fan OFF.
2. Use the fan reverse switch, located on the switch
housing (G) to optimize your fan for seasonal
performance.
Using a ceiling fan will allow you to raise your
thermostat setting in summer and lower your
thermostat setting in winter without feeling a difference
in your comfort.
Note:
Wait for the fan to stop before moving the
reverse switch.
2A. In warmer weather, push the reverse switch left to
display a Sun icon, which will result in downward airflow
creating a wind chill effect.
2B. In cooler weather, push the reverse switch right to
display a Snowflake icon, which will result in upward
airflow that can help move stagnant, hot air off the
ceiling area.

Important: The reverse switch must be set either
completely left or right in order for the fan to function
correctly. If the reverse switch is set in the middle
position, the fan will not operate Fig. 2C.
10
x 1
x 3 I
1
2
Fig. 2A
Lowes.com/harborbreeze
18
G
NN
Fan Pull Chain
G
Fig. 2B
Fig. 2C