Hillrom A-71417 Instrucciones De Uso página 14

INSTRUCTIONS FOR USE
e. Pull the assembly out from the column, and
make sure the assembly is in the locked-out
position. The Cervical Traction Release button
will return to its original position.
f. Put the traction rope through the carriage, and
through the hole in the center of the bowtie.
The rope will go through the traction assembly
and out the left side of the column, near the
release.
g. Put the traction rope over and around the
pulley.
h. Press the carriage adjustment releases and put
the carriage in the desired position. See
"Change the Cervical Traction Angle".
WARNING: The maximum weight load for the traction assembly is 50 lbs (22.6
kg) when properly setup and used on the Allen Advanced Table in
accordance with these instructions for use. To exceed this weight could
cause patient fall, injury, or equipment damage.
Document Number: D-720774
Version: C
Page 14
Issue Date: 16 MAR 2020
Ref Blank Template: 80025117 Ver. F