Invacare Aquatec Ocean Manual Del Usuario página 12

Aquatec® Ocean / Ocean XL
B
A
2.
Insert the backrest D from behind into the seat frame
E, until the collar C touches the seat frame tube F.
IMPORTANT!
– Firmly tighten the screws using the Allen key
supplied.
– Check the screws regularly to ensure they are
sitting securely.
3. Position a washer B on each screw A and secure the
backrest on each side.
4. Tighten the screws with a torque of 5 Nm.
Adjusting the backrest cover
The tension of the backrest can be adjusted as desired.
12
WARNING!
– Make sure that at least two belts are always
passed by the backrest frame (on the outside)
and their belt locks are closed.
Tightening:
1. Pull the belts A of the backrest cover tighter.
Loosening:
1. Open the buckles B by squeezing the retaining lugs
together (arrows).
2. Push the belts back a little through the buckle.
3. Close the belt buckles.
4. Retighten the belts gently.
1552757-G