1. Remove any accessories fitted.
2. Pull the footrests out of the guides.
3. Remove the seat plate and the backrest cover.
4. Remove the side parts.
5. Reinsert the clips in the seat frame immediately so that
they are not misplaced.
6. Wipe down the individual parts using a cloth or
brush and commercially available cleaning agents and
disinfectants.
7. Rinse the parts with warm water.
8. Dry the parts with a cloth.
9. Re-assemble the product, see chapter 4 Setup.
Cleaning in a clinical environment
In addition to cleaning as described above, clean
the product after the release of each patient, after
ending of the period of use or on a minimum
monthly basis (depending on which occurs first) at
85 °C for 3 minutes in the autoclave.
CAUTION!
Risk of burning your skin
– Allow the product to cool after cleaning in the
autoclave.
Cleaning the backrest cover (optional)
1. Remove the backrest cover.
2. Machine-wash the cover at max. 60 °C using a mild
detergent.
1552757-G
IMPORTANT!
Risk of damage
– Washing at higher temperatures can cause
shrinkage.
– Do not tumble dry covers.
IMPORTANT!
Excessive cleaning can damage textile.
– We recommend to change the backrest cover
every two years for hygiene reasons.
Cleaning the toilet pan (optional)
The toilet pan can be cleaned in an autoclave at following
temperatures/times:
•
90 °C for 1 minute
•
85 °C for 3 minutes
•
80 °C for 10 minutes.
7.3 Changing the castors
WARNING!
Risk of accident due to incorrectly fitted castors.
– The castors must be replaced by a specialist
dealer.
Maintenance
21