Technical Characteristics; Reference Conditions; Electrical Characteristics; Power Supply - Chauvin Arnoux CA 6651 Manual De Instrucciones

3. TECHNICAL CHARACTERISTICS

3.1. REFERENCE CONDITIONS

Quantity of influence
Temperature
Relative Humidity
Supply voltage
Frequency of the measured signal

3.2. ELECTRICAL CHARACTERISTICS

Maximum current: 13 Aac (no DC)
Max. charging power: 2,9 kVA
Maximum current in the mains connector: 10 A
The mains connector is protected against overloads by a fuse.
Type 2 connector: 32A, 3PH+N+PE, type E-2201, 200/346V-240/415V

3.3. POWER SUPPLY

The CA 6651 is supplied by the charging terminal being tested via the type 2 connector.

3.4. ENVIRONMENTAL CONDITIONS

For indoor use, outdoor use without rain.
Domain of use
Storage
Pollution degree
Altitude

3.5. CONSTRUCTION CHARACTERISTICS

Dimensions of the housing (L x W x H) 150 x 83 x 77mm
Dimensions of the type 2 connector
Length of the cable
Weight
Protection index
0 to 40°C, 80% RH without condensation
-10 to 50°C, 80%RH without condensation
2.
<2,000m.
208 x 58 x 51mm
approximately 53cm
approximately 830g
IP20 per IEC 60529.
Reference values
23±5°C
20 to 75%RH
230 V single-phase
400 V three-phase
50Hz
31