Precautions For Use - Chauvin Arnoux CA 6651 Manual De Instrucciones

This instrument is compliant with safety standards IEC 61010-1 and IEC 61010-2-030 and the leads are
compliant with IEC 61010-031, for voltages up to 300 V in category II.
Failure to observe the safety instructions may result in electric shock, fire, explosion, and destruction of
the instrument and of the installations.
„ The operator and/or the responsible authority must carefully read and clearly understand the various
precautions to be taken in use. Sound knowledge and a keen awareness of electrical hazards are
essential when using this instrument.
„ If you use this instrument other than as specified, the protection it provides may be compromised,
thereby endangering you.
„ The tests can be performed only by an EVCI-qualified electrician or under the supervision of a qualified
electrician. The qualified individual must be trained for the specific task.
„ Do not use the instrument on networks of which the voltage or category exceeds those mentioned. The
CA 6651 can be used only on 230VAC/400VAC charging stations.
„ Do not use the instrument if it seems to be damaged, incomplete, or poorly closed.
„ Before each use, check that the insulation on the cord, connector, and housing is in good condition. Any
item of which the insulation is deteriorated (even partially) must be set aside for repair or scrapping.
„ All troubleshooting and metrological checks must be done by competent, accredited personnel.
1. PRESENTATION .....................................20
1.1. Delivery condition ..........................20
1.2. Introduction ...................................20
1.3. Presentation .................................21
1.4. Side view .......................................22
2. USE ...........................................................23
2.1. Visual inspection ...........................23
2.2. Functional test ...............................24
2.3. Check of electrical safety ..............25
2.4. Test of operation of the charging
terminal ..........................................28
2.5. Test report ......................................30
3. TECHNICAL CHARACTERISTICS .......31
3.1. Reference conditions .....................31
3.2. Electrical characteristics ................31
3.3. Power supply .................................31
3.4. Environmental conditions ..............31
3.5. Construction characteristics ..........31

PRECAUTIONS FOR USE

CONTENTS
3.6. Compliance with international
standards .......................................32
3.7. Electromagnetic compatibility (CEM) 32
4. MAINTENANCE .......................................33
4.1. Cleaning ........................................33
5. WARRANTY .............................................33
19